Emerald is a variety of the mineral beryl (Be3Al2(SiO3)6) colored green by trace amounts of chromium and sometimes vanadium.[2] Beryl has a hardness of 7.5–8 on the 10 point Mohs scale of mineral hardness.[2] Most emeralds are highly included, so their toughness (resistance to breakage) is classified as generally poor.
Etymology
The word "Emerald" is derived (via Old French: Esmeraude and Middle English: Emeraude), from Vulgar Latin: Esmaralda/Esmaraldus, a variant of Latin Smaragdus, which originated in Greek: σμάραγδος (smaragdos; "green gem"); its original source being either the Hebrew word אזמרגד izmargad[3] or the Sanskrit word मरग्दम् marakata meaning "green." The name could also be related to the Semitic word baraq (בָּרָק ;البُراق; "lightning" or "shine") (cf. Hebrew: ברקת bareqeth and Arabic: برق barq "lightning"). It is the same source for the names Persian (زمرّد zomorrod), TurkishGeorgianRussian (изумруд; izumrud)[4] and Armenian zmruxt. (zümrüt), Sanskrit (मरग्दम् maragdam), (ზურმუხტი; zurmukhti), meaning "emerald" or "green"
Emeralds, like all colored gemstones, are graded using four basic parameters – the four Cs of Connoisseurship: Color, Cut, Clarity and Crystal. The last C, crystal is simply used as a synonym that begins with C for transparency or what gemologists call diaphaneity. Before the 20th century, jewelers used the term water as in "a gem of the finest water"[5] to express the combination of two qualities, color and crystal. Normally, in the grading of colored gemstones, color is by far the most important criterion. However, in the grading of emerald, crystal is considered a close second. Both are necessary conditions. A fine emerald must possess not only a pure verdant green hue as described below, but also a high degree of transparency to be considered a top gem.[6]In the 1960s the American jewelry industry changed the definition of 'emerald' to include the green vanadium-bearing beryl as emerald. As a result, vanadium emeralds purchased as emeralds in the United States are not recognized as such in the UK and Europe. In America, the distinction between traditional emeralds and the new vanadium kind is often reflected in the use of terms such as 'Colombian Emerald.'[7]
Color
Scientifically speaking, color is divided into three components: hue, saturation and tone. Yellow and blue, the hues found adjacent to green on the spectral color wheel, are the normal secondary hues found in emerald. Emeralds occur in hues ranging from yellow-green to blue-green. The primary hue must, of course, be green. Only gems that are medium to dark in tone are considered emerald. Light-toned gems are known by the species name, green beryl. In addition, the hue must be bright (vivid). Gray is the normal saturation modifier or mask found in emerald. A grayish green hue is a dull green.Clarity
Emerald tends to have numerous inclusions and surface breaking fissures. Unlike diamond, where the loupe standard, i.e. 10X magnification, is used to grade clarity, emerald is graded by eye. Thus, if an emerald has no visible inclusions to the eye (assuming normal visual acuity) it is considered flawless. Stones that lack surface breaking fissures are extremely rare and therefore almost all emeralds are treated, "oiled", to enhance the apparent clarity. Eye-clean stones of a vivid primary green hue (as described above) with no more than 15% of any secondary hue or combination (either blue or yellow) of a medium-dark tone command the highest prices.[6] This relative crystal non-uniformity makes emeralds more likely than other gemstones to be cut into cabochons, rather than faceted shapes.Treatments
Most emeralds are oiled as part of the post lapidary process, in order to improve their clarity. Cedar oil, having a similar refractive index, is often used in this generally accepted practice. Other liquids, including synthetic oils and polymers with refractive indexes close to that of emerald such as Opticon are also used. The U.S. Federal Trade Commission requires the disclosure of this treatment when a treated emerald is sold.[8] The use of oil is traditional and largely accepted by the gem trade. Other treatments, for example the use of green-tinted oil, are not acceptable in the trade. The laboratory community has recently standardized the language for grading the clarity of emeralds. Gems are graded on a four step scale; none, minor, moderate and highly enhanced. Note that these categories reflect levels of enhancement not clarity. A gem graded none on the enhancement scale may still exhibit visible inclusions. Laboratories tend to apply these criteria differently. Some gem labs consider the mere presence of oil or polymers to constitute enhancement. Others may ignore traces of oil if the presence of the material does not materially improve the look of the gemstone.Given that the vast majority of all emeralds are treated as described above, and the fact that two stones that appear to be similar in quality may actually be quite far apart in treatment level, a consumer considering a purchase of an expensive emerald is well advised to insist upon a treatment report from a reputable gemological laboratory. All other factors being equal, a high quality emerald with an enhancement level graded moderate should cost 40–50% less than an identical stone graded none.
Emerald localities
A rare type of emerald known as a trapiche emerald is occasionally found in the mines of Colombia. A trapiche emerald exhibits a "star" pattern; it has raylike spokes of dark carbon impurities that give the emerald a six-pointed radial pattern.[citation needed] Emeralds come from three main emerald mining areas in Colombia: Muzo, Coscuez, and Chivor.[10] Emeralds are also found in other countries, such as Afghanistan, Australia, Austria, Brazil, Bulgaria, Cambodia, Canada, China, Egypt, Ethiopia, France, Germany, India, Italy, Kazakhstan, Madagascar, Mozambique, Namibia, Nigeria, Norway, Pakistan, Russia, Somalia, South Africa, Spain, Switzerland, Tanzania, United States, Zambia and Zimbabwe.[1] In the US, emeralds have been found in Connecticut, Montana, Nevada, North Carolina and South Carolina.[1] In 1998 emeralds were discovered in the Yukon.[citation needed]
Synthetic emerald
Hydrothermal synthetic emeralds have been attributed to IG Farben, Nacken, Tairus, and others, but the first satisfactory commercial product was that of Johann Lechleitner of Innsbruck, Austria, which appeared on the market in the 1960s. These stones were initially sold under the names "Emerita" and "Symeralds", and they were grown as a thin layer of emerald on top of natural colorless beryl stones. Although not much is known about the original process, it is assumed that Leichleitner emeralds were grown in acid conditions.[citation needed] Later, from 1965 to 1970, the Linde Division of Union Carbide produced completely synthetic emeralds by hydrothermal synthesis. According to their patents,[12][13] acidic conditions are essential to prevent the chromium (which is used as the colorant) from precipitating. Also, it is important that the silicon-containing nutrient be kept away from the other ingredients to prevent nucleation and confine growth to the seed crystals. Growth occurs by a diffusion-reaction process, assisted by convection. The largest producer of hydrothermal emeralds today is Tairus in Russia. They have succeeded to synthesize emeralds that have similar chemical composition as emeralds in alkaline deposits in Colombia, hence they are called “Colombian Created Emeralds” or “Tairus Created Emeralds”.[14] Luminescence in ultraviolet light is considered a supplementary test when making a natural vs. synthetic determination, as many, but not all, natural emeralds are inert to ultraviolet light. Many synthetics are also UV inert.[15]
Synthetic emeralds are often referred to as "created", as their chemical and gemological composition is the same as their natural counterparts. The U.S. Federal Trade Commission (FTC) has very strict regulations as to what can and what cannot be called "synthetic" stone. The FTC says: "§ 23.23(c) It is unfair or deceptive to use the word "laboratory-grown," "laboratory-created," "[manufacturer name]-created," or "synthetic" with the name of any natural stone to describe any industry product unless such industry product has essentially the same optical, physical, and chemical properties as the stone named."[16]
Wispy veil-like inclusions are common in flux-grown synthetic emeralds.
Emerald in different cultures, and emerald lore
In some cultures, the emerald is the traditional gift for the 55th wedding anniversary. It is also used as a 20th and 35th wedding anniversary stone.
The Authorized King James Version of the Bible, in Exodus 28:18 and 39:11, lists "emerald" as one of the precious stones in the breastplate of the high priest of the Jews; but modern consensus is that this is probably a mistranslation. (See Hoshen.)
Ireland is often referred to, especially in America, as the "Emerald Isle".[18]
In L. Frank Baum's The Wonderful Wizard of Oz, the city where the wizard rules is made of emerald and is called the Emerald City. The sixth book in the series is named after it.
